Tail Lamp Replacement

REMOVAL
1. Disconnect and isolate battery negative cable.
2. Remove the tail lamp unit (Refer to ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/TAIL LAMP UNIT - REMOVAL).
3. Rotate socket counterclockwise one quarter turn.
4. Pull socket from back of lamp.
5. Pull bulb from socket.

INSTALLATION
1. Push bulb into socket.
2. Push socket into back of lamp.
3. Rotate socket counterclockwise one quarter turn.
4. Install the tail lamp unit (Refer to ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/TAIL LAMP UNIT - INSTALLATION).
5. Connect battery negative cable.