Center High Mounted Stop Lamp (CHMSL) Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove fasteners from trunk latch cover by prying under the head of the fastener with a flat bladed tool.
3. Remove trunk latch cover.
4. Rotate socket counterclockwise one quarter turn.
5. Pull socket from back of lamp.
6. Pull bulb from socket.

INSTALLATION
1. Push bulb into socket.
2. Push socket into back of lamp.
3. Rotate socket clockwise one quarter turn.
4. Install trunk latch cover. Insert fasteners and press into place.
5. Connect battery negative cable.