Upper Deck Molding

UPPER DECK MOLDING

REMOVAL

1. Lower convertible top to midway position.
2. Remove screws attaching upper deck molding to rear deck panel above convertible top rear attachment.
3. Open decklid.
4. Remove screws attaching upper deck molding to rear deck panel inside decklid water trough.
5. Disconnect wire connector for CHMSL.
6. Remove upper deck molding from vehicle.

INSTALLATION

1. Position upper deck molding on vehicle.
2. Connect wire connector for CHMSL.
3. Install screws attaching upper deck molding to rear deck panel inside decklid water trough.
4. Install screws attaching upper deck molding to rear deck panel above convertible top rear attachment.
5. Raise and secure convertible top.