Left Front Wheelhouse Splash Shield
LEFT FRONT WHEELHOUSE SPLASH SHIELDREMOVAL
1. Remove left front wheel.
Fig. 11:
2. Remove the seven push pin fasteners, the three screws, and remove the transmission splash shield (Fig. 11).
Fig. 10:
3. Remove the fender trim (Fig. 10).
Fig. 12:
4. Remove the four push pin fasteners and remove the wheelhouse splash shield (Fig. 12).
INSTALLATION
1. Install the wheelhouse splash shield and install the 4 push pin fasteners.
2. Install the transmission splash shield, the seven push pin fasteners, and the three screws.
3. Install the fender trim and the trim screws.
4. Install the wheel assembly.