Compass/Mini-Trip Computer Replacement

REMOVAL
1. Disconnect and isolate the battery negative remote cable.
2. Remove the Instrument Cluster Bezel from the vehicle.

Fig.4 Compass/Mini-Trip Computer Retaining Fasteners:

3. With the cluster bezel removed, remove the two screws attaching the Compass/Mini-Trip Computer (Traveler) Module to the cluster bezel.
4. Unsnap the retaining clip and remove Compass/Mini-Trip Computer (Traveler) from the cluster bezel.

INSTALLATION
1. Snap the Compass/Mini-Trip Computer on the cluster bezel and install the retaining screws.
2. Install the Instrument Cluster Bezel.
3. Connect the battery negative remote cable.