Rear Door Speaker Replacement

REAR SPEAKER - JR41

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Fold down the rear seat backs.
3. Remove C-pillar trim.
4. Remove lower quarter trim behind rear seat backs.
5. Remove fasteners from rear shelf trim. Pull out trim to access speaker.
6. Remove speaker screws.
7. Disconnect wire harness connector.

Fig.9 Rear Speaker - JR41:

8. Remove speaker.

INSTALLATION
1. Connect wire harness connector to speaker.
2. Position speaker into opening.
3. Install speaker screws. Tighten to 4 Nm (35 in. lbs.).
4. Install rear shelf trim.
5. Install lower quarter trim panel.
6. Install C-pillar trim.
7. Raise seat backs.
8. Connect battery negative cable.

REAR SPEAKER - JR27

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Using a trim stick, pry the speaker grill from the trim panel.

Fig.10 Rear Speaker - JR27:

3. Remove speaker mounting screws.
4. Remove speaker from trim panel.
5. Disconnect wire harness connector from speaker.

INSTALLATION
1. Connect wire harness connector to speaker.
2. Position speaker into trim panel.
3. Install speaker mounting screws. Tighten to 4 Nm (35 in. lbs.).
4. Press speaker grill into position.
5. Connect battery negative cable.