Fluid - M/T: Service and Repair

1. Remove the filler plug.
2. Remove the drain plug and drain the oil.
3. Tighten the drain plug to the specified torque.

Tightening torque:.........32 ± 2 Nm (24 ± 1 ft. lbs.)

4. Fill with gear oil SAE 75W - 90W or 75W - 85W conforming to API classification GL-4 until the level comes to the lower portion of filler plug hole.

Quantity:
.............2.8 dm3 (3.0 quarts)

5. Tighten the filler plug to the specified torque.

Tightening torque:.................32 ± 2 Nm (24 ± 1 ft. lbs.)