Fog Lamp Bulb Replacement

REMOVAL
1. Disconnect and isolate battery negative cable.
2. Remove fog lamp unit (Refer to ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/FOG LAMP UNIT - REMOVAL).
3. Disconnect wire connector from back of fog lamp.
4. Rotate bulb base counterclockwise one quarter turn.
5. Pull bulb from back of lamp.

INSTALLATION
1. Install bulb and twist clockwise.
2. Connect the fog lamp harness connector.
3. Install fog lamp unit. (Refer to ELECTRICAL/LAMPS/LIGHTING EXTERIOR/FOG LAMP UNIT - INSTALLATION )
4. Connect battery negative cable.