Passenger Door Central Lock (Arm)/Unlock (Disarm) Switch Failure

Test 1 - 3:

Test 4 - 6:

SYMPTOM
PASSENGER DOOR CENTRAL LOCK (ARM)/UNLOCK (DISARM) SWITCH FAILURE

WHEN MONITORED
Continuously

SET CONDITION
If the BCM detects a signal on the Passenger Cylinder Lock Switch MUX circuit for over 10 seconds this code will set and will ignore the offending input until it is corrected.

POSSIBLE CAUSES
- Passenger cylinder lock switch binding
- Passenger cylinder lock switch shorted to voltage
- Passenger cylinder lock switch MUX circuit shorted to voltage
- Wiring harness intermittent defect
- Body control module - Passenger cylinder lock switch failure