Blend Door Output Shorted to Battery

Test 1 - 2:

Test 3 - 5:

Test 6:

SYMPTOM
BLEND DOOR OUTPUT SHORTED TO BATTERY

WHEN MONITORED
Whenever the BCM attempts to move the Blend Door Actuator.

SET CONDITION
This DTC will set if the BCM detects a short to voltage on the Blend Door Driver circuit.

POSSIBLE CAUSES
- Short to voltage between BCM and C200
- Blend door driver circuit shorted to other driver circuit
- BCM
- Driver circuits shorted together
- Blend door actuator
- Wiring harness inspection