Start and Stall Condition

Tests 1 - 2:

Tests 3 - 5:

Tests 6 - 8:

Tests 9 - 10:

SYMPTOM
START AND STALL CONDITION

POSSIBLE CAUSES
- Checking DTCS
- Checking SKIM DTCS
- Fuel Pressure Out Of Specs
- Fuel Pump Capacity (volume) Out Of Specs
- TP Sensor Sweep
- TP Sensor Voltage Greater Than 0.92 Volts With Throttle Closed
- ECT Sensor Operation
- Other Possible Causes For Start & Stall
- Restricted Fuel Supply Line
- Fuel Pump Inlet Strainer Plugged
- Fuel Pump Module