Hazard Warning Flasher: Service and Repair

COMBINATION FLASHER

Fig.11 Combination Flasher Location:

REMOVAL
The flasher is mounted to the back side of the multi-function switch. To gain access, the upper steering column cover must be removed. The flasher can be removed by pulling it forward. The flasher is serviced separately from the multi-function switch. The flasher is black in color for ease of identification.

INSTALLATION
The flasher is mounted to the back side of the multi-function switch. To gain access, the upper steering column cover must be removed. Push the flasher toward the rear of the vehicle. The flasher is black in color for ease of identification.