Side Rail Weatherstrip

SIDE RAIL WEATHERSTRIP

REMOVAL

FRONT
1. Partially raise convertible top.
2. Remove push in fasteners attaching weatherstrip to retainer.

Fig. 24:

3. Remove weatherstrip from vehicle (Fig. 24).

CENTER
1. Partially raise convertible top.
2. Remove push in fasteners attaching weatherstrip to retainer.

Fig. 25:

3. Remove weatherstrip from vehicle (Fig. 25).

REAR
1. Partially raise convertible top.
2. Remove push in fasteners attaching weatherstrip to retainer.

Fig. 26:

3. Separate weatherstrip from vehicle (Fig. 26).

INSTALLATION

FRONT
1. Position weatherstrip on vehicle.
2. Install push in fasteners into retainer channel, aligning embossment on back side of weatherstrip to corner of retainer.
3. Lower convertible top.
4. Secure convertible top.

CENTER
1. Position weatherstrip on vehicle.
2. Install push in fasteners into retainer channel, aligning embossment on back side of weatherstrip to corner of retainer.
3. Lower convertible top.
4. Secure convertible top.

REAR
1. Position weatherstrip on vehicle.
2. Install push in fasteners into retainer channel, aligning embossment on back side of weatherstrip to corner of retainer.
3. Push weatherstrip into retainer channel, aligning embossment on backside of weatherstrip to corner of retainer.
4. Lower convertible top.
5. Secure convertible top.