Speaker: Description and Operation

SPEAKER
Standard - JR41
The standard equipment speaker system includes speaker in four locations: One 15.2 cm X 22.9 cm (6 in. X 9 in.) speaker is installed in each front door and one 15.2 cm X 22.9 cm (6 in. X 9 in.) speaker is installed outboard at each end of the rear shelf panel.

Standard - JR27
The standard equipment speaker system includes speaker in six locations: One 15.2 cm X 22.9 cm (6 in. X 9 in.) speaker is installed in each front door, one 15.2 cm X 22.9 cm (6 in. X 9 in.) speaker is installed in each quarter trim panel and one 6.4 cm (2.5 in.) speaker installed in each end of the instrument panel.

Premium
The optional premium speaker system includes speakers in six locations: One 15.2 cm X 22.9 cm (6 in. X 9 in.) speaker is installed in each front door, one 15.2 cm X 22.9 cm (6 in. X 9 in.) speaker is installed outboard at each end of the rear shelf panel and one 6.4 cm (2.5 in.) speaker installed in each end of the instrument panel. The system includes a separate 120-watt amplifier located under the front passenger seat.

Two wires connected to each speaker, one feed circuit (+) and one return circuit (-), allow the audio output signal electrical current to flow through the voice coil. For complete circuit diagrams, refer to the appropriate wiring information. The wiring information includes wiring diagrams, proper wire and connector repair procedures, details of wire harness routing and retention, connector pin-out information and location views for the various wire harness connectors, splices and grounds.