Removal - 2.0L Engine

REMOVAL - 2.0L ENGINE

NOTE: Before proceeding, Refer to Service Precautions.

1. Siphon as much fluid as possible from the power steering fluid reservoir.
2. Raise the vehicle.








3. Back out the tube nut securing the power steering fluid pressure hose to the gear.
4. Remove the pressure hose tube from the gear.





5. Remove the structural collar between the engine and transaxle.
6. Remove the bolt securing the pressure hose bracket to the engine block.
7. Lower the vehicle.





8. Back out the tube nut securing the power steering fluid pressure hose to the power steering pump and remove the hose.