Removal-1.6L Engine

REMOVAL-1.6L ENGINE





NOTE: Before proceeding, review all Warnings and Cautions. Refer to Service Precautions.

1. Remove filler cap from power steering fluid reservoir.
2. Siphon as much fluid as possible from the fluid reservoir.
3. Remove clamp attaching supply hose to power steering fluid reservoir. Disconnect hose from reservoir.
4. Press the tang on the reservoir mounting bracket retaining the reservoir to the bracket, then pull upward on reservoir and remove it from the bracket. Lay reservoir with return hose attached out of the way.
5. Remove clamp attaching supply hose to power steering pump. Remove hose from pump.