Dome Lamp: Service and Repair

REMOVAL
Lamp
1. Disconnect and isolate the battery negative cable.
2. Insert a trim stick between the dome lamp bezel and dome lamp lens.
3. Carefully pull down on lamp lens to remove lamp from headliner.
4. Disconnect wire connector.
5. Remove lamp.

Bulb
1. Disconnect and isolate the battery negative cable.
2. Insert a trim stick between the dome lamp bezel and dome lamp lens.
3. Carefully swing down one side of the lamp lens.
4. Remove bulb from lamp socket.

INSTALLATION
Lamp
1. Place lamp into position.
2. Connect wire connector.
3. Install dome lamp and lens.
4. Connect the battery negative cable.

Bulb
1. Push bulb in socket and snap into place.
2. Position lens on lamp and snap into place.
3. Connect the battery negative cable.