Instrument Cluster Replacement

REMOVAL

CAUTION: The Instrument Cluster MUST be stored in a face up position or damage will occur to the gauge operation.

1. Disconnect and isolate the battery negative cable.
2. Remove both left and right A-Pillar trim covers. Refer to Body and Frame/Interior Trim/Trim Panel/Service and Repair. Service and Repair
3. Remove the instrument panel top cover. Instrument Panel Top Cover
4. Remove cluster bezel. Instrument Panel Center Bezel
5. Remove the four screws attaching cluster housing to the base panel.
6. Pull the cluster rearward to disconnect from base panel.
7. Remove the cluster assembly

INSTALLATION

CAUTION: The Instrument Cluster MUST be stored in a face up position or damage will occur to the gauge operation.

1. Install the cluster assembly.
2. Push the cluster forward to connect to base panel.
3. Install the four screws attaching cluster housing to the base panel.
4. Install the cluster bezel. Instrument Panel Center Bezel
5. Install the instrument panel top cover. Instrument Panel Top Cover
6. Install both left and right A-Pillar trim covers. Refer to Body and Frame/Interior Trim/Trim Panel/Service and Repair. Service and Repair
7. Connect the battery negative cable.