Installation

INSTALLATION
1. Prime oil pump before installation by filling rotor cavity with engine oil.
2. Install oil pump and gasket carefully over the crankshaft. Position pump onto block and tighten bolts to 28 Nm (250 in. lbs.)
3. Install new O-ring on oil pickup tube.
4. Install oil pickup tube.
5. Install oil pan.
6. Install crankshaft sprocket.
7. Install timing belt.
8. Install the timing belt covers.
9. Install the crankshaft vibration damper.
10. Install the accessory drive belts.
11. Install the radiator fan.
12. Fill the cooling system.
13. Fill engine crankcase with proper oil to the correct level.