Installation

INSTALLATION - RESERVOIR





1. Lubricate the O-ring seal on the power steering fluid reservoir with fresh clean power steering fluid.





2. Install the power steering fluid reservoir on the power steering pump. The reservoir is installed on the pump by pressing the nipple of the reservoir straight into the pump without twisting or rotating the reservoir.
3. Install and securely tighten the three bolts mounting the power steering fluid reservoir to the power steering pump. Tighten bolt on pulley side to 13 Nm (115 inch lbs.). Tighten bolts on rear to 24 Nm (212 inch lbs.).
4. Install the power steering pump on the engine.