Rear Hose

REMOVAL
1. Move glass panel to the fully closed position.
2. Disconnect the control switch and wire connector.
3. Remove headliner as necessary.
4. Remove rear shelf panel.

Fig.8 Rear Drain House:

5. Disconnect the end of the drain tube from the rubber grommet at the end of the drain tube closest to the rear window of the vehicle.
6. Drain any liquid from hose connection, if necessary.
7. Disconnect the top end of the drain hose from the sunroof housing drain nipple.
8. Remove drain hose clips from the body holes.

INSTALLATION
1. Using the proper drain hose (there is a right and left side rear hose) attach drain hose clips to body holes, with the flair at the top towards the sunroof nipple.
2. Connect top flair end of the drain hose to the sunroof housing drain nipple with the ratchet clamp.
3. Connect the lower end of the drain tube to the rubber grommet near the rear window of the vehicle.
4. Connect the drain hose to the sunroof housing and test drainage.
5. Install shelf panel, ensure not to pinch the rubber grommets.
6. Install headliner.
7. Connect the control switch wire connector. Install control switch.
8. Test for proper operation of the sunroof.