Door Lock Cylinder: Service and Repair
LOCK CYLINDERREMOVAL
1. Remove door trim panel.
2. Remove water shield, as necessary
3. Raise door glass.
4. Disengage clip holding lock link to lock cylinder.
5. Disconnect link from lock cylinder.
6. Disconnect clip attaching lock cylinder to door handle.
Fig. 12:
7. Pull lock cylinder from door handle (Fig. 12).
INSTALLATION
1. Push lock cylinder into socket on door handle.
2. Insert link into clip on lock cylinder.
3. Engage clip to fasten lock link to lock cylinder.
4. Verify lock operation.
5. Install watershield.
6. Install door trim panel.