Glove Box Latch Replacement

REMOVAL
1. Remove the four screws at bottom of glove box door.
2. Open the glove box door and slide sidewalls inboard to remove the door/box assembly from instrument panel.
3. Place the glove box on a cloth to protect the door surface.
4. Remove the nine screws from backside of the door.
5. Separate the inner and outer door.
6. Remove one screw to the latch.
7. Remove latch from outer door.


NOTE: If the glove box door is going to be left off for an extended period of time, the Ignition Off Draw (IOD) fuse should be pulled to maintain battery condition.


INSTALLATION
1. Install latch from outer door.
2. Install one screw to the latch.
3. Place the the inner and outer door together.
4. Install the nine screws to the backside of the door.
5. Slide sidewalls inboard to install the door/box assembly into instrument panel.
6. Install the four screws at bottom of glove box door to instrument panel.