Inspection Procedure 30

CD can not be ejected.

DIAGNOSIS

STEP 1. Is the key switch (ignition key) at "ACC" or "ON?"

Q: Is the key switch (ignition key) at "ACC" or "ON?"

YES: Go to Step 2.
NO: Check the memory backup power supply circuit. Refer to Inspection Procedure 21.

STEP 2. Is the combined amplifier or radio set connected securely?

Q: Is the combined amplifier or radio set connected securely?

YES: If the CD is not ejected, do not discard it, because the player may be damaged. Therefore, contact a service shop for repairs. Check that a CD can be ejected normally.
NO: Connect the connectors securely. Check that a CD can be ejected normally.