Inspection Procedure 23

Automatic search does not work.

DIAGNOSIS

STEP 1. Can the "APS" (automatic search) button be depressed properly?

NOTE: When the time between songs on a tape is less than three seconds, or when there is a three seconds period in the middle of a song in which the volume level is extremely low the automatic search function may not work properly.

Q: Can the "APS" (automatic search) button be depressed properly?

YES: Go to Step 2.
NO: The button is operated improperly. Replace or repair tape player. Check that the automatic search function operates normally.

STEP 2. Does the player work if the tape is changed?

NOTE: Ensure that the tape label is not loose, that the tape itself is not deformed and that the tape is tightly wound. Also, tapes of C-120 or greater length often get caught in the mechanism and should not be used.

Q: Does the player work if the tape is changed?

YES: The tape used is defective.
NO: Repair or replace the tape player. Check that the automatic search function operates normally.