Inspection Procedure 3

The compass is Not Correctly.

STEP 1. Check the vehicle location.

Q: Are there any constructions, such as high-voltage wires or a steel bridge, which might affect the compass sensor?

YES: After moving to a location where the magnetic field is stable, check the faulty condition again.
NO: Go to Step 2.

STEP 2. Correct magnetization

Q: Was magnetization corrected?

YES: Go to Step 3.
NO: Correct magnetization.

STEP 3. Correct magnetic declination

Q: Was magnetic declination corrected?

YES: Go to Step 4.
NO: Correct the magnetic declination.

STEP 4. Demagnetize

Q: Was that demagnetized?

YES: Replace the compass sensor.
NO: Demagnetize it.