Brake Warning Indicator: Service and Repair

CLUSTER ILLUMINATION AND WARNING LAMPS REPLACEMENT

REMOVAL
1. Remove the Instrument Cluster.
2. Turn over cluster and expose the illumination bulbs or warning indicator bulbs/socketed LEDs by removing the cluster cardboard back cover. For accurate identification of the defective bulb or LED, see the labels on the PC board.
3. After Identifying the defective bulb or LED, twist it out of the cluster using a counterclockwise motion.

INSTALLATION
1. Install the new bulb/LED socket into the cluster using a clockwise motion.
2. Install the cluster cardboard back cover.
3. Install the Instrument Cluster.