Hydraulic Control Assembly - Antilock Brakes: Description and Operation

DESCRIPTION








The Hydraulic Control Unit (HCU) and the Controller Antilock Brake (CAB) used with this antilock brake system are combined (integrated) into one unit, which is called the Integrated Control Unit (ICU). The ICU is located below the air cleaner housing on the lower radiator support.

The ICU consists of the following components: the CAB, eight (build/decay) solenoid valves (four inlet valves and four outlet valves), valve block, fluid accumulators, a pump, and an electric motor.

The replaceable components of the ICU are the HCU and the CAB. No attempt should be made to service any individual components of the HCU or CAB. For information on the CAB.

OPERATION
For information of the ICU, refer to these individual components of the ICU:
^ CONTROLLER ANTILOCK BRAKE (CAB)
^ HYDRAULIC CONTROL UNIT (HCU)