Seat Track: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative remote cable.
2. Remove the Front Seat Assembly from vehicle.
3. Remove the Front Seat Back.
4. Separate power seat switch and harness from the power seat track.
5. Remove four power seat track retaining fasteners from cushion pan and remove the power seat track.

INSTALLATION
1. Position the seat track and install the four power seat track retaining fasteners on cushion pan. Torque the fasteners to 27 Nm (20 ft. lbs.).
2. Install the power seat switch and harness on the power seat track.
3. Install the Front Seat Back.
4. Remove the Front Seat Assembly from vehicle.
5. Connect the battery negative remote cable.