Steering Column Trim/Bracket Replacement

STEERING COLUMN OPENING COVER

REMOVAL
1. Remove three lower shroud attaching screws.
2. Remove five knee bolster mounting screws and remove bolster.
3. Remove upper and lower shroud.
4. If removing the upper half only:
a. Remove lower shroud attaching screws.
b. Loosen the lower part of instrument cluster hood for clearance as necessary.
c. Remove upper shroud.

INSTALLATION
1. For installation, reverse the above procedures.
2. Tighten steering column shroud retaining screws to 2 Nm (17 in. lbs.) torque.