Trip Computer: Service and Repair

REMOVAL
1. Remove the CMTC/Traveler from the instrument panel. Refer to Body, Instrument Panel, Compass/Mini-Trip Computer, Removal.
2. With the CMTC removed from the cluster bezel, remove the tape from the lamp access opening at the bottom of the CMTC/Traveler.
3. With a screwdriver, twist the bulb assembly 1/4 turn counterclockwise. Remove bulb and replace.

INSTALLATION
1. With a screwdriver, twist the bulb 1/4 turn clockwise.
2. Install the tape to the access opening at the bottom of the CMTC/Traveler to prevent any light leaking.
3. Install the CMTC/Traveler. Refer to Body, Instrument Panel, Compass/Mini-Trip Computer, Installation.