Right SIACM Loss of Ignition Run/Start (Active)

Test 1:

SYMPTOM
RIGHT SIACM, LOSS OF IGNITION RUN-START - ACTIVE

TEST NOTE
This symptom is diagnosed using the test RIGHT SIACM ACCELEROMETER 1 - ACTIVE.

WHEN MONITORED
When the ignition is in the Run-Start position the Right SIACM monitors the Fused Ignition Switch Output Run-Start circuit for proper system voltage. This is an active trouble code only.

SET CONDITION
If the voltage on the Fused Ignition Switch Output Run - Start circuit is below 6.7 volts, the code will set.

POSSIBLE CAUSES
- Right side impact airbag control module, active/stored code