ORC Loss of Ignition Run/Start (Stored)

Test 1:

SYMPTOM
ORC, LOSS OF IGNITION RUN-START - STORED

TEST NOTE
This symptom is diagnosed using the test ORC, CALIBRATION MISMATCH - STORED.

WHEN MONITORED
With the ignition in the run or start position the ORC monitors the Fused Ignition Switch Output Run-Start circuit for proper system voltage.

SET CONDITION
If the voltage on the Fused Ignition Switch Output Run-Start circuit drops below 4.5 volts, the code will set.

POSSIBLE CAUSES
- Checking for active ORC DTC's
- Stored code present