Blower Motor Impeller: Service and Repair

REMOVAL
The blower motor is located on the bottom right side of the unit housing. The blower motor can removed from the vehicle without having to remove the unit housing assembly.

With Air Conditioning
1. Remove right side scuff plate.
2. Pull back carpet.
3. Disconnect blower motor wiring connector.

Fig.3 Blower Motor Retaining Screws:

4. Remove blower motor retaining screws, and lower blower motor assembly from unit housing.

Without Air Conditioning
1. Disconnect blower motor wiring connector.

Fig.4 Blower Motor Removal:

2. Grasp the blower motor while pulling down tab. Turn approximately 1/8 turn counterclockwise and remove blower motor assembly from unit housing.

INSTALLATION
The blower motor is located on the bottom right side of the unit housing. The blower motor can be removed from the vehicle without having to remove the unit housing assembly.

With Air Conditioning
1. Position the blower motor into the unit housing.
2. Install the blower motor retaining screws.
3. Connect the wire harness to the blower motor.
4. Reposition the right side carpet.
5. Install the right side scuff plate.

Without Air Conditioning
1. Position the blower motor in the unit housing.
2. Rotate the blower motor clockwise until tab snaps into the locked position, approximately 1/8 turn.