Temperature Door Cable Replacement

REMOVAL

Fig.14 Instrument Panel Center Bezel And Knobs:

1. Remove instrument panel center stack bezel.

Fig.15 HVAC Center Air Duct And Control Head:

2. Remove heater-A/C control head.
3. Remove center air duct.
4. Disconnect cable at control panel. Remove control from instrument panel.

Fig.21 HVAC Housing Cables:

5. Disconnect cable at heater unit.
6. Remove cable from vehicle.

INSTALLATION
1. Position the cable in the vehicle.
2. Connect the cable at the heater unit.
3. Connect the cable at the heater A/C control head.
4. Install the center air duct.
5. Install the heater A/C control head.
6. Install the instrument panel center stack bezel.