Overhaul

REMOVAL
1. Remove three glove box door hinge screws.
2. Open glove box and remove assembly from vehicle.
3. Remove the latch by gently prying the retainer clip out of its slot.
4. Remove eight screws retaining glove box door to bin assembly.
5. Separate glove box door from bin and remove.
6. Remove dampers by gently stretching them over the end of their pins.

INSTALLATION
1. Assemble glove box door and bin.
2. Install the eight screws retaining glove box door to bin assembly.
3. Install the latch using retainer clip.
4. Install glove box dampers over end of pins.
5. Place glove box into instrument panel opening.
6. Close glove box door and install the three glove box door hinge screws.