Speaker - Instrument Panel (Infinity) Replacement

REMOVAL

CAUTION: Do not operate the radio with speaker leads detached. Damage to the output devices may result.

Negative Battery Cable Remote Terminal:

1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Remove instrument panel top cover.
3. Remove two retaining screws to center speaker and disconnect wiring connector.
4. Remove speaker from vehicle.

INSTALLATION
1. Place speaker into position on instrument panel.
2. connect wiring connector, install two retaining screws to center speaker.
3. Install instrument panel top cover.
4. Connect the negative battery cable remote terminal to the remote battery post.