Recall - VECI Label Replacement: Overview
NUMBER: 851
DATE: January 2000
TITLE: Emissions Recall No. 851 - VECI Label Replacement
MODELS: 2000 (JX) Chrysler Sebring Convertible
NOTE:
This recall applies only to the above vehicles equipped with a 2.5L engine ("H" in the 8th position) and a Federal emissions control system (sales code NAA) built from September 3, 1999 through September 7, 1999 (MDH 0903XX through 0907XX).
IMPORTANT:
Some of the involved vehicles may be in dealer vehicle inventory. Dealers should complete this repair on these vehicles before retail delivery. Dealers should also perform this repair on vehicles in for service. Involved vehicles can be determined by using the DIAL VIP System.
Subject
A Canadian Vehicle Emission Control Information (VECI) label was inadvertently installed on about 90 of the above Federal emission control vehicles. The VECI label is often used during in-use Inspection and Maintenance (I/M) testing to verify proper emissions related components. As a result, incorrect VECI label information could cause the vehicle to fail an emission test.
Repair
A new VECI label must be installed over the vehicle's original VECI label. New VECI labels are being mailed directly to all vehicle owners known to DaimlerChrysler with the Owner Notification letter. The owners are requested to install the label themselves or, if preferred, to arrange for dealer installation of the owner-supplied label without charge.
Parts Information
Each dealer to whom vehicles in the recall were invoiced (or the current dealer at the same street address) will receive enough labels (included with the vehicle list) to service 100% of unsold vehicles according to our records.
If an owner's label is lost, or if dealers require more labels for inventory vehicles, additional VECI labels, PN 04591585AA, may be ordered as needed.
Service Procedure
Apply the VECI label as follows:
1. Raise the hood and locate the original VECI label on the upper radiator core support.
2. Clean the surface of the original VECI label and apply the new label directly over it, covering the original label.
Completion Reporting and Reimbursement
Claims for vehicles which have been serviced must be submitted on the DIAL System. Claims submitted will be used by DaimlerChrysler to record recall service completions and provide dealer payments.
Use the following labor operation number and time allowance:
Labor Operation Time
Number Allowance
Install VECI label 25851182 0.2 hours
NOTE:
See the Warranty Administration Manual, Recall Claim Processing Section, for complete recall claim processing instructions.
Parts Return
Not Applicable
Dealer Notification and Vehicle List
All dealers will receive a copy of this dealer recall notification letter by first class mail. Two additional copies will be sent through the DCMMS, and the MDS2 will be updated to include this recall in the near future. Each dealer to whom involved vehicles were invoiced (or the current dealer at the same street address) will receive a list of their involved vehicles. The vehicle list is arranged in Vehicle Identification Number (VIN) sequence. Owners known to DaimlerChrysler are also listed. The lists are for dealer reference in arranging for service of involved vehicles.
DIAL System Functions 53 and VIP
All involved vehicles have been entered to DIAL System Functions 53 and VIP for dealer inquiry as needed.
Function 53 provides involved dealers with an updated VIN list of their incomplete vehicles. The customer name, address and phone number are listed if known. Completed vehicles are removed from Function 53 within several days of repair claim submission. To use this system, type "53" at the "ENTER FUNCTION" prompt, then type "0RD851".
Owner Notification and Service Scheduling
All involved vehicle owners known to DaimlerChrysler are being notified of the service requirement by first class mail. They are requested to install the supplied VECI label over the original label on their vehicle. Any owner who prefers not to install the label is asked to schedule an appointment for the service with their dealer. A copy of the owner notification letter is included.
Enclosed with each owner letter is an Owner Notification Form. The involved vehicle and recall are identified on the form for owner or dealer reference as needed.
Vehicle Not Available
If a vehicle is not available for service, let us know by filling out the pre-addressed Owner Notification Form or describe the reason on a postcard and mail to:
DaimlerChrysler Corporation
CIMS 482-00-85
800 Chrysler Drive East
Auburn Hills, Michigan 48326-2757
Additional Information
If you have any questions or need assistance in completing this action, please contact your Zone Service Office.
Customer Services Field Operations
DaimlerChrysler Corporation