License Plate Bulb: Service and Repair

REMOVAL
1. Remove screws attaching license plate lamp to rear bumper fascia.
2. Remove license plate lamp from rear fascia.
3. Rotate socket counterclockwise one quarter turn.

License Plate Lamp Bulb:

4. Pull socket from back of lamp.
5. Pull bulb from socket.

INSTALLATION
1. Push bulb into socket.
2. Push socket into back of lamp.
3. Rotate socket clockwise one quarter turn.
4. Position license plate lamp to rear fascia.
5. Install screws attaching license plate lamp to rear bumper fascia.