Verification Test VER-5A2

VERIFICATION TEST VER-5A2

Applicability - All

1. Fuel Rich/Lean or Misfire Verification.

2. With the DRB III, monitor the Similar Conditions to attempt to duplicate the conditions that the vehicle was operating at when the code was set. If the conditions can be duplicated, the Good Trip counter will change to one or more.

3. If the conditions cannot be duplicated, erase trouble codes, disconnect the DRB and continue.

4. If the repaired OBD II trouble code has reset, or the OBD II monitor failed after running, the repair is not complete. Check for any technical service bulletins or flash updates and return to Symptom List.

5. If a new DTC has set, return to Symptom List and perform the tests specified for that code.

6. If the monitor ran, and the Good Trip counter changed to one or more, the repair was successful.

7. Erase trouble codes.

8. Disconnect the DRB III.