Output Driver Not Tested (Stored)

Test 1:

SYMPTOM
OUTPUT DRIVER NOT TESTED (STORED)

TEST NOTE
This symptom is diagnosed using the test AECM & CLUSTER CCD MESSAGE MISMATCH (STORED).

WHEN MONITORED
Continuously with ignition ON.

SET CONDITION
This code may set whenever another code is set due to any short to battery or short to ground failure. If all other codes have been repaired and this code appears by itself, the problem will be an internal failure of the airbag control module.

POSSIBLE CAUSES
- Stored code has become active
- Stored code has not been reproduced