Battery Power to Module Disconnected

Test 1:

Test 2 - 7:

Test 8 - 9:

SYMPTOM
BATTERY POWER TO MODULE DISCONNECTED

WHEN MONITORED
Constantly monitored.

SET CONDITION
The input voltage to the body control module drops below 5 volts.

POSSIBLE CAUSES
- BCM defect - fused IGN SW out
- Fused IGN SW out CKT SHRT to GND - BCM
- CCD BCM ground circuit open
- BCM defect
- Fuse # 11 defective
- No response IGN SW output voltage
- No response fused B+ volt low
- No response fused ign output voltage