Windshield Washer Spray Nozzle: Service and Repair

REMOVAL
1. Open hood.
2. Disconnect the windshield washer hose from the underside of the washer nozzle.
3. Using a plastic body filler spreader or equivalent (credit card), gently place it underneath the front of the washer nozzle. Be careful not to damage the hood seal underneath the nozzle.
4. Rock the nozzle back and forth slightly to release it from the hood panel.

INSTALLATION
1. For installation, reverse the above procedures.
2. After connecting hose, check for proper system function and to assure leak free connections by actuating the washer system switch from inside of vehicle.