Front Door

FRONT VERTICAL GUIDE BAR

REMOVAL

1. Remove door trim panel and water dam.
2. Remove door speaker, if equipped.
3. Remove front lift guide.
4. Remove bolt attaching top of front guide bar to inner door panel.
5. Using a Snap-one flare-nut socket (FRXM10) and a hex wrench, remove nut attaching bottom of guide bar to door panel while holding jack screws.

INSTALLATION

1. Install nut attaching bottom of guide bar to door panel.
2. Install bolt attaching top of front guide bar to inner door panel.
3. Install front lift guide.
4. Install door speaker, if equipped.
5. Verify door glass alignment, adjust if necessary.
6. Install door trim panel and water dam.