Transmission Mount: Specifications

Bolts that have thread sealer or torque lock patches should not be reused. Always install new bolts in these applications.

Lateral Bending Strut to Engine	60 Foot Pound-Force (ft.lb)
Lateral Bending Strut to Trans	60 Foot Pound-Force (ft.lb)
Left Mount Through Bolt	80 Foot Pound-Force (ft.lb)
Left Mount to Transaxle	50 Foot Pound-Force (ft.lb)
Vertical Bending Strut to Engine	60 Foot Pound-Force (ft.lb)
Vertical Bending Strut to Trans	60 Foot Pound-Force (ft.lb)
Output Bearing Race Ret. Strap	96 Inch Pound-Force (in.lb)