NV T350 (A-578) Transaxle

Fig. 31:

The back-up lamp switch is located on the top left front side of the transaxle case (Fig. 31).

REMOVAL
1. Lift vehicle on hoist.
2. From bottom side of vehicle, disconnect back-up lamp switch connector.
3. Unscrew switch from transaxle.

INSTALLATION
1. Install back-up lamp switch. Teflon tape or equivalent must be used on switch threads.

CAUTION: Do not overtighten switch.

2. Connect back-up lamp switch connector.
3. Lower vehicle.
4. Verify back-up lamp operation.