Parking Light Bulb: Service and Repair

REMOVAL
1. Release hood latch and open hood.
2. Remove screws attaching headlamp module to upper crossmember.
3. Remove headlamp module from vehicle.
4. Disconnect wire connector from back of park and turn signal lamp bulb.

Headlamp Bulb:

5. Remove bulb from headlamp module.

INSTALLATION
1. Install bulb into headlamp module.
2. Connect wire connector to the back of park and turn signal lamp bulb.
3. Place headlamp module in position.
4. Install screws attaching headlamp module to upper crossmember.
5. Close hood.