Instrument Panel Center Bezel

INSTRUMENT PANEL CENTER BEZEL

REMOVAL

1. Remove HVAC control knobs from control head.

Fig. 17:

2. Remove both center A/C outlet louvers (Fig. 17) by rolling downward and pulling out.
3. Remove two screws retaining the top front of the center bezel up inside the center A/C outlet duct.
4. Using a trim stick (special tool #C-4755) or equivalent, gently pry out on instrument panel center bezel.
5. Remove bezel from vehicle.

INSTALLATION

1. Position the instrument panel center bezel over mounting slots and firmly snap into place.
2. Install the two screws retaining the top front of the center bezel up inside the center A/C outlet duct.
3. Install both center A/C outlet louvers (Fig. 17) by snapping into place.
4. Install the HVAC control knobs onto the control head.