Cowl Moulding / Trim: Service and Repair

COWL GRILLE SCREEN

REMOVAL

1. Release hood latch and open hood.
2. Remove windshield wiper arms.

Fig. 1:

3. Remove the five screws holding cowl cover to cowl at base of windshield opening (Fig. 1).
4. Remove hood to cowl seal, at the leading edge of cowl cover. Pull the seal towards the front of the vehicle.
5. Separate the cowl cover from the vehicle.

INSTALLATION

1. Place cowl panel in place on vehicle.
2. Install the five screws holding cowl panel to cowl at base of windshield opening.
3. Push the hood to cowl seal over the forward flange of the cowl cover and cowl plenum.
4. Install windshield wiper arms.