Sunroof / Moonroof Switch: Service and Repair

CONTROL UNIT

REMOVAL

Fig. 1:

1. Remove sun visors, front grab handles, A-pillar screw, Right upper B-pillar trim. Disengage front door weatherstrip from headliner, pull headliner down to access control unit (Fig. 1).
2. Disconnect wire connector from control unit.
3. Slide control unit up and forward and remove.

INSTALLATION

1. Place sunroof control unit into position.
2. Lock control unit into position.
3. Connect wire connector to control unit.
4. Install sun visors, front grab handles, A-pillar screw, Right upper B-pillar trim. Engage front door weatherstrip to headliner.
5. Cycle sunroof to the full open position.
6. Ensure sunroof adjustment.